You buy a big jumbo roll for $100. Cut it into small rolls, and you can sell them for $300.
But you don’t have the machine.
Or you do have one, but it’s slow, cuts crooked, or keeps breaking the web.
Don’t worry. After reading this, you’ll know why two buyers in Ghana and Poland secretly switched to this paper slitting and rewinding machine.
Are You Still Sending Your Jumbo Rolls Out For Slitting?
How much do they charge you per roll? $30? $50?
Do the math: if you send out 1,000 tons a year, the processing fees alone could buy you two new machines.
And you wait – wait for the truck, wait for their schedule, wait for their mood.
Worst of all: you never know if the cut is straight.
Rough edges? Loose rolls? Short meters? You just have to accept it.
Why not slit in-house?
Because you think a paper rewinder machine costs a fortune.
It doesn’t.
What Makes A Slitter “Good”?
Forget the fancy specs. You only need to check four things:
- Is the cut straight? If not, it’s scrap. Our machine gives you a clean, razor-sharp edge – no fuzz.
- Is it fast? This runs at 350 m/min. A 7,000-meter roll? Done in 20 minutes.
- Is it stable? At 4 to 5.5 tons, this machine doesn’t dance. Some lightweight slitters shake like crazy at high speed – would you trust them?
- Can one person run it? Yes. Load the roll, set the knives, press start. The machine does the rest.
You might ask: “Is setting the knives hard?”
No. One wrench, two minutes. We even pre-set them at the factory.
What’s The Narrowest And Widest It Can Slit?
Narrowest: 30 mm.
Widest: 1300, 1600, or 1800 mm – depending on which model you choose.
Whatever width your supplier gives you, this machine can slit it.
How big can the finished rolls be?
Up to 1000 mm in diameter.
That’s as thick as a car tire. Fewer roll changes, less downtime.
What Materials Can It Cut? What can’t it?
✅ Paper Slitter Rewinder
Paper, duplex paper, offset paper, adhesive labels (sticker paper), coated paper, laminated paper, white cardboard, kraft paper, thermal paper, paper-plastic laminates, color-printed laminates
❌ Paper Slitter Rewinder
aluminum foil, PVC, BOPP, OPP, PET, plastic film, non-woven fabric, PP, mica tape, photographic film, rubber strips, clear tape, medical X-ray film, fabric, leather
Not sure? You can contact us anytime and tell us the name of the material you want to cut. We’ll cut it on our machine and send you a video.
Contact information:
WeChat/WhatsApp/phone: +86 159 3715 3321
Email: admin@chinayugongmachinery.com
What About After-Sales Service? What If The Paper Rewinder Machine Breaks?
One-year warranty. After that, we still answer emails and supply spare parts. Lifelong support.
Installation options:
- DIY: We give you a manual + video + remote guidance (WhatsApp/WeChat). Most customers do this.
- We send an engineer: $100/day + travel + food + hotel. Takes 5–8 days, including training.
Do you need an air compressor? Yes, a small one
Wrong voltage? We’ll modify the machine or supply a transformer.
Can you add a corona treatment? Yes, for printing on plastic films.
Lead time? 10–30 working days. Larger models take longer.
Can I see the machine run before shipping? Yes. We’ll run it, record a video, and you approve before we ship.
Three Models – Which One Should I Buy?
| Model | Max Parent Roll Width | Best for |
| YG-1300 | 1300 mm | Most common. Label paper, printing paper, thin films. |
| YG-1600 | 1600 mm | Wide packaging films, large kraft rolls. |
| YG-1800 | 1800 mm | Industrial wide materials. |
Not sure?
Just tell me:
- Your raw roll width and thickness
- The finished roll width you need
- Approximate daily throughput
I’ll reply within 24 hours with a recommendation. No charge.
Dare To Try It For A Month – Risk Free?
Yes.
Order the machine. Use it for 30 days.
If you’re not happy – crooked cuts, too slow, hard to operate – return it.
Full refund. We’ll even pay return shipping.
And if you mention “trial”, we’ll throw in a free set of spare blades.
Keep the blades even if you return the machine.
This offer is for the first 5 units worldwide.
One Last Truth
If you don’t buy this paper rewinder machine, your competitor will.
They’ll slit at half your cost and deliver twice as fast.
Are you still going to give your profit to a middleman?
👉 Email admin@chinayugongmachinery.com right now. Tell me:
- What material did you cut
- Your raw roll width
- The finished roll width you need
I’ll reply within 24 hours with:
- Which model fits you best
- A video of that machine cutting the same material
- A door‑to‑door price
Slit in‑house. Keep the profit.
Appendix – Full Specifications (for engineers)
| Model | YG- 1300 | YG- 1600 | YG- 1800 |
| Max width | 1300mm | 1600mm | 1800mm |
| Max Diameter for unwinding | ￠1400mm | ￠1400mm | ￠1400mm |
| Min width of slitting | 30mm | 30mm | 30mm |
| Max Diameter of rewinding | ￠1000mm | ￠1000mm | ￠1000mm |
| Speed | ≤350m/min | ≤350m/min | ≤350m/min |
| Total Power | 24kw | 26kw | 30kw |
| Power supply | 380V/50hz | 380V/50hz | 380V/50hz |
| Weight | 4000kg | 4500kg | 5500kg |
| Overall dimension(LxWxH) | 3300x3150x1930(mm) | 3300x3450x1930(mm) | 3300x3650x1930(mm) |