Six o’clock in the evening. All other machines on the site have stopped. Your excavator with an ordinary hydraulic shear is still going “clunk, clunk” on a 30 cm thick H-beam.
One cut – the steel just dents. Another cut – the hydraulic oil temperature alarm goes off.
The site supervisor is smoking and urging, “We must finish this bay today, or tomorrow’s new equipment can’t move in.”
You look at your watch and calculate in your head: that single beam has already cost you 30 minutes and nearly 200 dollars in fuel. This is not about having a weak excavator. It’s about having the wrong “mouth.”
One beam takes half an hour – ten beams take most of a day. Delay penalty → client deducts money → operator asks for overtime → hot oil damages the pump. Even worse, cheap shear blades often chip, forcing you to stop and wait three days for spares.
Have you ever calculated? In a demolition project, 15% of your total cost is wasted on “can’t cut” and “waiting for parts.” It’s time to upgrade to a real eagle beak scissors – designed specifically to crush metal and reinforced concrete.
Meet The Eagle Beak Scissors – A Metal Pulverizer, Not An Ordinary Cutter
This excavator hydraulic eagle beak shear (also called a steel structure shear or rebar shear) is completely different from ordinary demolition shears on the market.
Its “mouth” is longer, its bite is stronger, and its blades resist impact much better. It is made for: I-beams, rebar, steel bars inside concrete piles, scrap car bodies, and steel plates.
And it is not a “one-size-fits-all” product – we have a model for every excavator from 13 tons up to 110 tons.
Just tell us your excavator size. We will match the right flow and weight. Install it and work immediately. No need to modify your excavator’s hydraulic circuit.
A demolition boss once told us, “With my old shear, I cut two truckloads of scrap steel per day. With these eagle beak scissors, I cut five loads a day – and the excavator doesn’t even struggle.”
What Does The Eagle Beak Scissors Mean For Your Daily Work?
Technical specs like “bar, lpm, mm” can make your head spin. Look at this simplified table instead. All you need to know is “How big is my excavator?” and “How thick can it cut?”
| Model | Suitable Excavator (arm mount, tons) | Opening (mm) – what it can bite | Cutting depth (mm) – how deep it goes | Weight (kg) – no head-tipping |
| YG180RT | 13–17 | 375 | 395 | 1100 |
| YG280RT | 18–27 | 485 (wider than a washbasin) | 525 | 2100 |
| YG330RT | 25–35 | 595 (can swallow a 30 cm column) | 630 | 3000 |
| YG380RT | 28–39 | 620 | 600 | 3500 |
| YG430RT | 40–50 | 700 (can bite a scrap car wheel) | 720 | 4500 |
| YG480RT | 42–50 | 740 | 750 | 4600 |
| YG580RT | 51–65 | 780 (large steel beams – one bite) | 780 | 5800 |
| YG780RT | 68–90 | 860 (close to 1 meter) | 850 | 7800 |
| YG980RT | 91–110 | 950 (shipbreaking class) | 940 | 9800 |
Three Hidden Features Of The Excavator Hydraulic Eagle Beak Shear That Put More Money In Your Pocket
1. Smooth rotation – bite even a rebar cage from the best angle
The eagle beak scissors can rotate 360° hydraulically. When you are cutting a reinforced concrete column, you don’t need to reposition your excavator. Just rotate the wrist and find the perfect biting point.
👉 Result: save time + save fuel + less back‑and‑forth driving for your operator.
2. Replaceable blades – 30% tougher than ordinary steel
Our blades use imported wear‑resistant steel. The cutting edge is specially hardened for high‑strength materials. Even when you cut manganese steel rails, the blades wear down gradually – they never chip suddenly.
👉 Result: ordinary shears need blade replacement every month; ours can last two to three months. Less downtime, less spending on spares.
3. Stable working pressure – no damage to your main pump
Many cheap shears raise the pressure too high to cut faster. That burns out your excavator’s main pump. Our pressure and flow are carefully matched. While cutting fast, the hydraulic oil temperature stays below 80°C.
👉 Result: your excavator will last two more years.
Real Contractors Are Already Using The Excavator Hydraulic Eagle Beak Shear
USA – A scrap recycling yard with a YG330RT on a 30‑ton excavator went from 40 tons of scrap per day to 80 tons. The owner said, “These eagle beak scissors paid for themselves in three weeks.”
UAE – A building demolition contractor used a YG430RT to tear down 12,000 square metres of steel‑concrete structure in four days. The project manager told us, “I’ve never seen a shear so fast.”
Germany – A concrete pile factory bought a YG580RT to cut pile heads. They saved more than €5,000 per year on blade changes alone.
This is not magic. Many contractors simply never knew that an excavator hydraulic eagle beak shear could be so much faster than an ordinary hydraulic shear.
One Final Truth
In the demolition and scrap industry, the secret to making more money is not squeezing the excavator’s hourly rate. It is saving three seconds on every cutting cycle.
An eagle beak scissors used for three years will save you enough in fuel and working time to buy another small excavator.
👉 Ready to stop struggling with slow cutting and project delays?
Fill out the form below or call +86 159 3715 3321. Tell us your excavator tonnage and what material you mainly cut. We will send you a personalised selection sheet and real work videos.
