A set of our concrete laser screed machine was supplied to Turkey, helping the customer boost the flatness and efficiency of concrete floor construction. Let’s take a closer look at the details of this cooperation and field application.
A large‑scale industrial construction company in a certain location in Turkey had just secured a contract to build a 15,000m² automotive parts factory. The project specifications required a floor flatness of FM2 (FF 50 / FL 35) — a standard that is extremely difficult to achieve with traditional manual screeding methods. The contractor tried using conventional strike‑off screeds and hand trowels on a small test section. The results were disappointing: the surface had visible deviations exceeding 6mm over a 3‑meter span. The client’s quality inspector rejected the section outright.
The project manager knew he needed a more advanced solution. After researching online, he found YG’s machine. He wanted a unit that could deliver high‑precision results without breaking his budget, while also handling large‑area pours efficiently. YG recommended the YGJX33 model, a machine with a self‑leveling screed head and microcomputer-controlled laser.
Technical Parameters Of The Concrete Floor Leveling Machine
YG offers four models of the concrete laser screed machine. Based on the customer’s 15,000 m² project area, a typical slab thickness of 150mm, and the need for high precision, YG selected the YGJX33. Below are key specifications:
| Model | YGJX31 | YGJX32 | YGJX33 | YGJX34 |
| Engine | ||||
| Model | Generator set | GX390 Electric start | GX390 Electric start | GX390 Electric start |
| Power | 2.0kW | 13hp/3600rpm | 13hp/3600rpm | 13hp/3600rpm |
| Fuel tank (L) | 14.5 | 6.5 | 6.5 | 6.5 |
| Running device | ||||
| Drive | Motor | Hydraulic motor | Hydraulic motor | Hydraulic motor |
| Running mode | Infinitely variable speed | Handle control, stepless speed | Handle control, stepless speed | Handle control, stepless speed |
| Running speed(m/min) | 0-36 | 0-45 | 0-65 | 0-45 |
| Suggest working speed(m/min) | 5 | 5 | 5 | 5 |
| Screed head | ||||
| Type | Self-leveling | Electric control, self-leveling | Self-leveling | Hydraulic control, self-leveling |
| Width | 2500mm | 2500mm | 2500mm | 2500mm |
| Exciting force | 500N | 500N | 500N | 500N |
| Vibration frequency | 50Hz | 50Hz | 50Hz | 50Hz |
| Laser control system | ||||
| Control type | Microcomputer laser scan | Microcomputer laser scan | Microcomputer laser scan | Microcomputer control |
| Operation mode | Walk-behind | Walk-behind | Walk-behind | Walk-behind |
| Forward and reverse | Handgrip control, stepless speed-walking | Hydraulic control | Handgrip control, stepless speed-walking | Hydraulic control |
| Size and weight | ||||
| Working size(mm) | 2758*2622*1980 | 2740×2659×1980 | 2578×2643×1980 | 2780*2622*1980 |
| Weight(kg) | 295 | 365 | 380 | 410 |
The YGJX33 concrete laser screed machine features a 2500mm screed head with 500N exciting force and 50Hz vibration frequency. It also includes a microcomputer laser scan control system for real‑time height adjustment. This unit weighs 380kg and can reach running speeds up to 65 m/min.
How Did YG Laser Concrete Leveling Machine Transform The Floor Pour?
The Turkish contractor deployed the machine on the first 2,000 m² section of the factory floor. The setup process was straightforward: laser emitters were placed around the site, projecting a 360° horizontal reference plane. The machine’s laser receiver captured the signal in real time and fed data to the onboard microcomputer. The results were immediate:
- Precision: The concrete laser screed machine achieved a floor flatness of FF 52 / FL 38 — surpassing the FM2 requirement. The laser‑guided automatic leveling system kept deviations under 3mm over a 3‑meter span.
- Speed: The laser screed machine proved its value — it covered 400‑500m² per 8‑hour shift, compared to just 120m² with manual methods.
- Consolidation: The 500N vibrating screed head compacted the concrete uniformly, reducing surface voids and minimizing the risk of.
The laser concrete leveling machine also eliminated the need for multiple passes. One pass of the machine achieved what previously required three separate steps: strike‑off, vibration, and finishing.
Customization For Turkish Site Conditions
YG engineers considered Turkey’s variable climate — hot summers and cold winters — as well as the site’s power availability. Customizations included:
- GX390 electric start engine with recoil backup for reliable starting in all weather conditions.
- Hydraulic drive system for smooth, infinitely variable speed control, allowing the operator to adjust forward speed from 0 to 65 m/min based on concrete consistency.
- Self‑leveling screed head that automatically compensates for minor ground irregularities, maintaining consistent slab thickness.
- Microcomputer laser scan control with a user‑friendly interface, enabling quick recalibration when moving between pour sections.
For the concrete laser screed machine, YG also provided Turkish‑language control labels and an operator manual. The laser concrete leveling machine was shipped with a spare set of vibration isolators and laser receiver protective covers.
Tangible Results After Using The Concrete Laser Screed Machine
After completing the entire 15,000m² factory floor over six weeks, the Turkish contractor recorded measurable gains:
- Labor cost dropped by 60% — the machine required only two operators per shift, compared to five workers for manual screeding.
- Construction time shortened from 10 weeks to 6 weeks — the machine’s 400‑500m² daily output accelerated the schedule.
- Material waste decreased by 15% — the machine applied precise amounts of concrete, reducing over‑order and spoilage.
- Client satisfaction soared — the finished floor passed all quality inspections on the first attempt, with no rework required.
The laser screed machine price was recovered within the first project. The contractor has since purchased a second YGJX34 unit for hydraulic‑controlled operations on a logistics warehouse project.
Smooth Cooperation And Final Conversion
YG provided laser emitter setup diagrams and pour sequence recommendations. Sea freight was arranged from China to Mersin port, then trucked to the jobsite. Remote video support via WhatsApp guided the first calibration and laser alignment. The concrete laser screed machine came with a one‑year warranty and a comprehensive spare parts kit, including extra laser receiver sensors and vibration belts.
For any industrial contractor, warehouse developer, or commercial builder who needs reliable concrete floor-finishing equipment, YG offers proven solutions. From high‑precision leveling to cost‑effective performance, our concrete floor leveling machine delivers results. Contact us today for a free quote.
【WhatsApp/WeChat/Phone】+86 159 3715 3321
