You know that feeling. End of the day. Your shoulders ache. Your arms are covered in dried mortar. And you’ve only covered half the wall you planned. The boss is pushing for faster progress. The client keeps walking by, checking the finish.
Manual plastering is slow, messy, and brutal on your body.
Now picture this instead: set up a lightweight machine against the wall, press a button, and watch perfect mortar spread evenly from floor to ceiling. No trowel arm. No re-dipping. Just smooth, consistent coverage at 500 square meters per shift.
That’s what this wall rendering machine delivers. Every single day.
The Old Way Is Killing Your Productivity
Let’s be honest about the usual headaches:
- Skilled plasterers are hard to find and expensive to keep.
- Hand application is uneven—thick here, thin there.
- Rework eats up time and material.
- Your crew’s backs and knees take a beating.
- Big walls take forever, and height work is dangerous.
A wall plastering machine for sale changes all of that. One operator, one machine, one smooth finish.
How It Works—Simple Setup, Fast Results
The concept is straightforward.
You mix your mortar to the right consistency, load it into the machine’s hopper. The motor drives a rotor that pushes the material up through a hose to the nozzle. The nozzle applies an even layer across the wall as the machine climbs or as you guide it.
Thickness? Adjustable from 2mm up to 30mm in a single pass.
Height? Up to 5 meters without moving the machine.
And it runs on standard 1.5KW power—220V or 380V, whichever your site has.
Meet The Two Models—YG-800 And YG-1000
Two sizes. One simple choice—match it to your typical wall height.
| Model | YG-800 | YG-1000 |
| Plastering height | Below 4 meters | Below 5 meters |
| Weight | 270 kg | 290 kg |
| Plastering thickness | 2~30 mm | 2~30 mm |
| Power | 1.5 KW | 1.5 KW |
| Plastering efficiency | 500 CBM/8H | 550 CBM/8H |
| Voltage | 220 v/380 v optional | 220 v/380 v optional |
YG-800—The Reliable Workhorse
Need to plaster walls up to 4 meters high? The YG-800 has you covered.
270 kg—light enough to move around a site by two workers. Fits through standard doorways. Sets up in minutes.
500 m² per 8-hour shift—that’s roughly five to six average rooms per day. Compare that to a manual crew doing maybe 150 m². Three times faster.
2-30mm adjustable thickness—one pass for scratch coat, second pass for finish. No building up layers forever.
1.5KW motor—runs off standard site power. No generator needed unless you’re way off-grid.
220V or 380V—tell us your site voltage, we’ll ship the right motor.
This wall rendering machine is the most popular choice for residential projects, apartment blocks, and commercial interiors. Reliable, simple, and gets the job done.
YG-1000—The High-Reach Specialist
Got taller walls? The YG-1000 reaches up to 5 meters. That’s a full floor height in most buildings.
290 kg—only 20 kg heavier than the 800. Still manageable on-site.
550 m² per 8 hours—that extra height means more coverage without repositioning. Less setup time, more plastering time.
Same 2-30mm thickness range. Same 1.5KW power. Same voltage options.
This wall plastering machine for sale is built for warehouse walls, gymnasiums, factories, and any space with high ceilings. Set it once, cover a huge area, move on.
What Makes These Machines Stand Out?
Lightweight design—under 300 kg. Most machines this size are heavier. You save on transport and handling.
Simple controls—any worker can learn them in half a day. No specialist training required.
Quick clean-up—remove the hopper, run clean water through the system. Done in 15 minutes.
Durable motor—1.5KW induction motor runs cool even after hours of continuous use. No overheating, no breakdowns.
Dual voltage ready—works on 220V (standard household) or 380V (industrial). No need for transformers.
Consistent output—the rotor system delivers uniform pressure. No sputtering, no gaps, no thick spots.
Which One Do You Need?
Two questions to decide:
1. How high are your walls?
- Under 4 meters → YG-800
- 4 to 5 meters → YG-1000
- Over 5 meters → you’ll need scaffolding and run the machine in sections (YG-1000 still works, just move it up)
2. What’s your typical job size?
- Small residential → YG-800 is plenty
- Large commercial or industrial → YG-1000 gives you the extra reach and speed
Both machines share the same motor, same power, same thickness range, and same reliability. The only difference is height and weight.
Maintenance—Keep It Running For Years
Daily:
Clean the hopper and nozzle thoroughly. Mortar dries hard—don’t let it sit.
Weekly:
Check the rotor and stator for wear. Replace if output drops.
Monthly:
Inspect all hoses and fittings. Tighten bolts. Lubricate moving parts.
Storage:
Keep in a dry place. Cover to keep dust off. Winter? Store above freezing to protect seals.
Trusted By Contractors Worldwide
These wall rendering machines are already working on sites across Europe, Asia, Africa, and the Americas. Contractors love them for the speed, builders love them for the consistent finish, and workers love them for saving their backs.
Ready To Plaster Faster And Cleaner?
Stop wrestling with trowels and tired crews. Get a wall rendering machine that covers more area in a day than a team can in three.
YG-800 for standard walls. YG-1000 for tall walls. Both built to last, both priced to pay back fast.
Send us your specs. We’ll send you the right machine.
phone / WhatsApp / WeChat: +86 159 3715 3321
