

A copper wire granulator for sale is a complete recycling line that crushes waste cables, separates copper from plastic, and produces clean copper granules. Selling mixed waste cable without processing means you forfeit the full value of copper while still covering the cost of plastic waste disposal. Burning cables or stripping insulation by hand leads to heavy labor waste, serious safety hazards, and lower metal recovery efficiency. Using a separator with insufficient precision results in cross-contamination: copper particles remain mixed in plastic output, and plastic residues end up in the copper fraction.
Contact us today and ask for a live test on your cable mix before you choose a copper wire granulator for sale.
Find The Right Solution For Your Job
Wire Granulator Machine Parameters
The table below shows hot-selling models for a copper wire granulator for sale, so you can compare capacity and power before you request a quote.
| Specifications | YG-260 | YG-300 | YG-400 | YG-600 | YG-800 |
| Overall dimensions (L × W × H) | 1100 × 595 × 1750 mm | 2300 × 900 × 1900 mm | 2760 × 2500 × 2200 mm | 4600 × 2200 × 2400 mm | 4600 × 2200 × 2400 mm |
| Main motor power | 3 kW | 5 kW | 7.5 kW | 30 kW | 55 kW |
| Blower power | 0.75 kW | 1.5 kW | 2.2 kW | 3 kW | 3 kW |
| Dust removal fan power | 0.75 kW | 1.5 kW | 2.2 kW | 3 kW + 1.5 kW* | 3 kW + 2.2 kW* |
| Specific gravity separator power | 0.04 kW × 2 | 2.2 kW | 2.2 kW | 2.2 kW | 3 kW |
| Vibrating screen power | — | 0.12 kW × 2 | 0.12 kW × 2 | 0.18 kW × 2 | 0.18 kW × 2 |
| Total power | 4.58 kW | 10.94 kW | 14.34 kW | 41.56 kW | 66.56 kW |
| Voltage | 220 V, 50 Hz | 380 V, 50 Hz | 380 V, 50 Hz | 380 V, 50 Hz | 380 V, 50 Hz |
| Processing capacity | 40–80 kg/h | 80–150 kg/h | 150–300 kg/h | 300–500 kg/h | 500–800 kg/h |
These models handle cable wire, network cable, square wire, earphone wire, waste wire, waste circuit boards, waste communication wire, mixed wire, aluminum-plastic wire, and hard-to-recycle fine wire.
Receive Detailed Parameter List


Industrial Copper Wire Granulator Machine Core Selling Points
1. Save Floor Space and Move Easily
This machine has a small footprint, moves easily, and needs no complex installation. You save floor space, cut setup time, and start production faster. The compact one-piece layout supports quick placement and simple debugging.
2. High Automation with One-Key Control
This cable wire recycling machine lets one operator run the line with a PLC automatic control system and one-key operation. You lower labor cost, get uniform feeding, and reduce daily operating hassle. The automated control system supports stable running and simple use.
3. High Separation Accuracy
A copper wire granulator for sale uses layered separation and variable-frequency control to improve copper-plastic separation. You get cleaner copper, cleaner plastic, and higher recovery value. Airflow separation uses density differences, and screening helps finish the separation process.
4. Three-in-One Dust Removal: Cleaner and Quieter Operation
This system uses cyclone dust removal, bag filter dust removal, and air purifier dust removal to address dust pollution. You get a cleaner workplace and easier environmental compliance. The machine also runs with low noise and low dust.
Get Your Project‑Specific Quote


Copper Wire Granulator For Sale Pain-Point Comparison
| Pain Point | Consequence | Solution |
| Selling mixed cable as-is | Lost copper value and plastic disposal cost | Crush and separate cable to recover copper granules and plastic |
| Manual stripping or burning | High labor cost, safety risk, lower recovery | Use automated crushing, airflow separation, and screening |
| Low separation precision | Copper left in plastic, plastic left in copper | Use layered separation and variable-frequency control |
| Dust and noise | Workplace issues and compliance pressure | Use three-in-one dust removal: cyclone, bag filter, air purifier |
| Complex installation and limited space | Slow start and higher setup cost | Use a compact one-piece structure and movable design |
| Skilled operator shortage | Training burden and unstable output | Use PLC automatic control and one-key operation with one operator |
Find The Right Solution For Your Job


YG After-Sales Support
YG copper wire granulator for sale models come with a complete range, customization support, source-factory service, professional after-sales support, fast delivery, and durable construction. Before shipment, confirm voltage, capacity, and cable type with our team. After delivery, our after-sales team supports installation and daily operation questions.






